One of the most frustrating issues for homeowners is a problem with their air conditioner in the summer. If you find that your HVAC system is not cooling properly then there are ways to trouble shoot the issue at home.
It is always worth calling an HVAC professional for repair and upkeep. Assessing the source of the issue and reporting it to the technician might help to get your issue resolved quicker. It is beneficial to communicate with your local heating and cooling services.
Have You Checked Your Thermostat?
Examine your thermostat to determine if it is in its appropriate temperature range. Verify that it’s set to either cool or heat. Ensure that the thermostat is not in fan mode. This will just run your fan and not the air conditioner.
Have You Checked Your Air Filter?
Like the air filter in your automobile, the air filter in your home air conditioning unit is essential to how well the unit performs. If the filter is clogged, it will likely lead to higher energy costs and the possibility of a premature failure in the system.
According to Energystar.gov, you should replace the filter every one to three months depending on the type you have. Always replace it with a good quality filter. The cheapest is not always the best.
If you have questions about what type of air filters are best for your home, Contact the local Raleigh experts at Boer Brothers Heating & Cooling.
Have You Checked Your Condensate Drain?
Air conditioners remove moisture from the air in a room and the water is typically drained through hose or pipe that can eventually become clogged with algae, dirt, or sediment. If the drain becomes clogged, the unit will shut down, which may cause the thermostat to go blank.
This feature prevents water from backing up into the overflow pan, which can overflow and cause serious damage to your home. The drain and piping must be cleared and repaired; if necessary, it can be replaced, but typically it should be cleaned with a bleach solution.
Is There Ice on Your Outdoor Condenser?
If your equipment is operating, but does not generate cold air, check the outside section and verify that no ice is visible. If you see ice, turn the system off immediately and contact a local HVAC contractor.
Most contractors will request whether you have ice, as this will influence the technician’s ability to perform their job. To analyze the issue and fix the issue, you’ll need to turn the unit off. Your licensed contractor will need to investigate and determine the issue.
Call A Trusted Professional Heating & Air Contractor in Raleigh
If you have checked the previously mentioned issues and continue to have problems with your air conditioner, call a licensed contractor. A professional technician will ensure that your system will operate at peak performance.
They will inspect your system, so it remains compliant with any local and national building codes. When in doubt, call a local, licensed contractor rather than risk damaging your system further by attempting a repair yourself.